10 Pack Handcrafted Durable High Tech Braided Doubled Cord Whip Crackers Poppers

Description

Handcrafted Snapdragon Braided Doubled Cord Crackers are individually crafted by me from cordage braided in the USA
These are doubled all the way to the feather, and the feather has 2x the fibers so these work better on heavier whips IMHO.
These are stiffer all the way down the shaft as they are doubled all the way down, reducing tangling and overhand knots.
They have a long bury splice forming a standing end loop for easy attachment to your cracker anchor or directly to the falls.
3 options are Split Tail feathered, Split tail unfeathered, and Concentric
Material Specs:
(Gray)   DUPONT VECTRON® 400lb braided material
Vectran®T97 HT is a high-performance multifilament yarn spun from liquid crystal polymer (LCP). It has high strength with virtually no creep or elongation. Vectran® has superior abrasion resistance, excellent moisture resistance, and exceptional property retention over broad ranges of temperature and chemical environments.
(Black)  TECHNORA® 400lb braided material
Braided Technora® 400 Lb. tensile strength. Polyurethane coating. This coating protects the Technora® from UV damage, increases flexibility, better knot strength, and chemical resistance. Solution dyed Black: Solution or doped dyed yarns are manufactured by adding a black pigment color to the polymer melt in spinning process.This results in fibers that are fully impregnated with pigment coming out of the spinnerets in a one step process. This process results in outstanding colorfastness and enhances UV protection.
(Yellow) PARA-ARAMID 400lb braided material
400 Lb. tensile strength -This is an 8 carrier diamond braid para aramid cord.
Like DuPont Kevlar® which is also a para aramid. This cord has similar  performance characteristics. It has low stretch, high chemical resistance and very high tenacity. The major feature of this cord is the lower cost.
(White)  DUPONT SPECTRA® 500lb braided material.
Spectra ® 500 Lb. tensile strength. Note: This product has been pre-stretched and heat set to reduce elongation over time. This cord is also coated with an soft waterborne aliphatic polyurethane and a polyethylene based textile softener. This makes the  Spectra ® better able to resist abrasion , and keep out contamination from dirt and sand that break down the fibers if allowed to get into the braid.
(White with black) HMPE High-Molecular-Polyethylene (HMPE)
350 Lb. tensile strength
Note: This product has been manufactured (braided, colored and coated) in the USA from a base material imported from an off shore manufacturer. It has similar characteristics as Spectra® and Dyneema® but it is not manufactured by Honeywell or DSM. This cord has a high tech abrasion coating with a neon yellow color. It is resistant to UV light, it floats, has low stretch and is very economical as compared to other high tech cords.
these are made 8-9" overall though I can make them shorter, or longer custom for your order, just spec it out.
These crackers have a long bury standing eye, the long bury section is double thick helping reduce overhand knots And reducing tangling. You can open the eye up some if you wish for easier attachment to the falls.
These Crackers are finished with a a couple of half hitches the smallest knot that will keep them together.
If you are not impressed with the crackers, send them back for a full refund.
They are made in pairs, with the eyes hitched together for easy installation.
TECHNORA® / PARA-ARAMID does not melt; it decomposes at relatively high temperatures (800°F to 900°F [427°C to 482°C]
And will turn to ash as they reach this temperature (you won't believe how long they will last in an open flame)
This makes them great for fire whip crackers.
The PARA-ARAMID is uncoated.
The TECHNORA has a very very light coating that doesn't catch fire, drip or cause any issue.