Perkin Elmer 785A Detector

Description

Perkin Elmer 785A Detector
The 785A is a LC variable wavelength detector that can operate from 190-700nm. Nitrogen purge hook-up is present for desired operation below 200nm. This instrument is fully programmable from the front-panel user interface, or it can be controlled remotely from the RS232 port.
** Normal exterior damage and unit does not turn on.
Specifications
Wavelength Range
190 - 700 nm
Wavelength Accuracy
± 1 nm
Wavelength Reproducibility
± 0.5 nm
Bandwidth
5 nm
Absorbance Range
0.0005 to 3.000 AUFS, in 0.0001 increments from 0.0005 to 0. 1, and 0.01 increments above 0.1 AUFS
Noise (210-280 nm, 1 sec rise time, standard 12 ul flow cell)
< ± 1 X 10-5 AU
Program Storage
8 Programs / 32 Events Each
Optics
Dual Beam
Recorder Output
10 mV Full Scale for any Selected Range
Drift
<1 x 10-4 AU/hour, after Warm-Up
Operation Below 200 nm
N2 Purge Provision
Noise Filter
Digitally controlled active with rise times selectable from 0.02 to 5.0 seconds 8 steps
Programmable Functions
Time, wavelength, range, rise time, auto zero, relay closures, program number, number of injections, shutdown procedure (program execution via run table)
Scan
Stopped flow scan, scan speed selectable from 0.2 to 1.0 nm/sec
Flow cell Backpressure
500 psi
Self Diagnostics
Self-check routine upon demand. Complete self-check routine performed upon power-up. Continuous monitoring of power supply condition, lamp status, fan operation, and leak sensor
Control Outputs
4 SPDT relays, 1 A/48 V (max); relays retain state even with power off
SKU: 3368014
**************************************************************
RETURNS -
This is an AS-IS item, returns are not accepted.
All items are described to the best of our ability.
Please refer to the pictures for condition and any available accessories.
Items are from surplus inventory. Please feel free to contact us if you have any questions and we'll do our best to answer. We always show the actual item being shipped on single items. If multiple items are available, we only provide a photo of one unit, but items will be in the same condition and are the same model.
We do assume that the buyer is knowledgeable and proficient in the use of this type of equipment.
Seller assumes no responsibility for damage or actions resulting from the use or misuse of the item sold.
We are not an authorized dealer for any of the products that we list on eBay. We are not a party to any manufacturer's warranty that may or may not apply.
SHIPPING -
We do reuse boxes and packing materials to help keep the cost of shipping down. We ship Monday - Friday.
We value your feedback and comments. If you are 100% satisfied,
please leave us a five star (*****), positive feedback
. If you are not satisfied with the purchase, please contact us and give us a chance to correct the issue. We do leave positive feedback once payment is received and the item is shipped.
THANK YOU!
BE SURE TO LOOK AT ALL OUR ITEMS LISTED ON EBAY